use for quoting, preliminary design, prototyping and informational purposes only not released for production this product manufactured with lead-free processing pb 13.34 .525 ref 19.50 .768 21.59 .850 0.635 (typ) .0250 (tol. non-accum) 22.95 ref .904 0.50 ref .020 1.32 ref .052 1.10 ref .043 1.68 ref .066 "a" "a" c c1-b,i-og c2-b,i-og c c3-b-mv c 01 35 row a row b row c row d c l 4 4 item no. part number quantity material 1 sub-im-c-299-01-s 18.000 phos bronze, 521 hard temper 2 sub-im-c-299-02-s 17.000 phos bronze, 521 hard temper 3 ht3-035-01-ra 1.0000 vectra e130i, color: black 4 wt-61-01-t 2.0000 phos bronze, 510 1/2 hard 5 ht3-bc-035-01 1.0000 vectra e130i, color: black 20.80 .819 ref 23.95 ref .943 15.05 .593 ref 3 c l 5 4 4 8.75 .344 ref 20.44 0.08 .805 .003 (see note 10) 1.32 .052 'b' 'd' 1 2 c14-b,i-og c 4 row d row c row b row a c 4 c11-b,i-xr c 4 4 4 15 cpc frequency this sheet a b c1, c2, c3, c11, c14 c d sheet of unless otherwise specified, dimensions are in millimeters[inches]. tolerances are: decimals angles x.x: 0.3[.01] 2 x.xx: 0.13[.005] x.xxx: 0.051[.0020] 4 row 0.635mm socket by: ASP-149117-01 dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing vicky z 12/10/2009 2 1 sheet scale: 2:1 ASP-149117-01 f:\dwg\sw\newprod\pt635mm\hypertransport\ASP-149117-01.slddrw revision notes: 1. represents a critical dimension. 2. minimum pushout force: 2.22n[0.5 lb]. 3. inspect dimension at both ends of part. all visible solder crimps to be checked. 4. for quantities up to 49 pieces, no leader, trailer, or reel will be supplied. for quantities of 50-124 pieces, no leader or trailer will be supplied. 5. parts to be packaged in tape and reel. 6. attach label "ASP-149117-01" to each tape & reel package. 7. measurement must be taken from the lowest point of this surface (standoff). 8. solder composition; 96.5% tin/3.5% silver. 9. measurement must be taken to back cap. 10. check dimension at first and last row of tails. material: insulator: lcp contact: phos bronze wt: phos bronze plating: contact area: .000030 gold over .000050 nickel remainder: .000200 ref tin over .000050 nickel 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail info@samtec.com code 55322
6.63 .261 ref 3.49 ref .138 1.25 - 0.05 + 0.10 .049 - .002 + .004 (typ) 1.41 .055 (typ) 8.75 ref .344 1.34 ref .053 0.38 ref .015 8.17 .322 0.25 ref .010 2.30 .091 ref (typ) 4.50 ref .177 19.80 .780 20.80 .819 (see note 9) 2.45 ref .096 8.05 ref .317 'c' section "a"-"a" scale 4 : 1 4 c5-b-mv c c4-f,i-mv c c8-b,i-cp c see note 8 4 c12-b-cp c 4 4 4 0.05 .002 (see note 3 & 7) 2.08 .082 3.23 .127 detail 'c' scale 8 : 1 c7-b,i-mv c c6-f-og c see note 7 c10-b,i-og c9-b,i-og c c 4 4 0.15[.006] 1.15 0.08 .045 .003 (see note 10) 20.44 ref .805 (see note 10) 0.635 (typ) .0250 detail 'b' scale 6 : 1 c13-b,i-og c c15-b,i-og c 4 4 4 20.44 ref .805 (see note 10) detail 'd' scale 6 : 1 4 4 4 critical dimension inspection instruction table assembly operation in-process inspection inspect code b fill wafers c1, c2, c4, c7, c8, c9, c10, c13, c14, c15 fill weld tabs c3, c5 fill back cap c12 finished assembly c1, c2, c3, c4, c5, c6, c7, c8, c9, c10, c11, c12, c13, c14, c15 cpc frequency this sheet a b c5, c8, c9, c10, c12, c13, c15 c d f c4, c6 sheet of 4 row 0.635mm socket by: ASP-149117-01 dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. vicky z 12/10/2009 2 2 sheet scale: 2:1 f:\dwg\sw\newprod\pt635mm\hypertransport\ASP-149117-01.slddrw revision 4 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail info@samtec.com code 55322
|
